Web Analytics Made Easy -
StatCounter
Re: Settings on Cinetape

Re: Settings on Cinetape


jeffrey truong
 

From the manual: It's is a rounding system.
 
Adjusting the Display Resolution (Starting at Version 1.06)
The Display Resolution is the amount of distance rounding-off that is shown on the Cine Tape Measure
display. Reducing the resolution (Increasing the rounding-off) is useful when a more stable display is
desired. The resolution setting is the third item accessed through the Power-up Menu. This setting shows
as “rE x” or “rE –x” where “rE” is the abbreviation for resolution and “x” is the amount of rounding-off. The
displayed minus sign (-) is the graphical representation for plus or minus (+/-). The four resolution settings
are; 1, 2, -1 & -2.
The ‘1’ setting is the normal (maximum) setting and maintains the displayed distance
until the actual (physical) distance change is greater than 1 unit.
The ‘2’ setting maintains the displayed distance until the actual (physical) distance
change is greater than 2 units. Only even numbers are displayed.
The ‘-1’ setting maintains the displayed distance until the actual (physical) distance
change is plus or minus (+/-) 1 unit.
The ‘-2’ setting maintains the displayed distance until the actual (physical) distance
change is plus or minus (+/-) 2 units. Only even numbers are displayed.
To access the display resolution adjustment, unplug the power cable, then plug it back into the Cine Tape
Measure while pushing and holding the Select / Adjust knob. The brightness setting shows initially.
Momentarily push (click) the Select / Adjust knob twice to advance past the close focus adjustment to the
display resolution adjustment. Adjust the resolution to the desired level by turning the Select / Adjust
knob. Then lock the setting into memory and return to normal operation by momentarily pushing (click) the
Select / Adjust knob

Join cml-ac@cml.news to automatically receive all group messages.