Web Analytics
Re: Extreme BMD 12K test

Re: Extreme BMD 12K test


Geoff Boyle
 

The same file as before but with the exposure changed to plus 3 which is effectively rating the camera at ISO 128,000

Zoomed in by 1.5* to match the frame line in my VF that was set for an 8K image within a 12K recording. This was to allow for extreme movements during stabilisation. A frame line of 10K within the 12K would have been more than adequate.

I spent a little more time on the noise profile in Neat this time :-) but stabilisation was just select stabilise, select perspective and click start, camera lock was enabled, zoom was disabled. The manual zoom mentioned above was applied after stabilisation.

 

 

https://vimeo.com/491544224

 

cheers
Geoff Boyle NSC FBKS
EU based cinematographer
+31 637155076

www.gboyle.nl

www.cinematography.net

Become a CML Patron https://www.patreon.com/bePatron?u=43292735

 

 

From: cml-raw-log-hdr@... <cml-raw-log-hdr@...> On Behalf Of Geoff Boyle
Sent: Wednesday, 16 December 2020 07:51
To: cml-raw-log-hdr@...
Subject: Re: [cml-raw-log-hdr] Extreme BMD 12K test

 

I forgot to say that it took about 15 minutes in total to do this. An hour if you include going down in the lift and across the street to shoot it 😊

 

cheers
Geoff Boyle NSC FBKS
EU based cinematographer
+31 637155076

www.gboyle.nl

www.cinematography.net

Become a CML Patron https://www.patreon.com/bePatron?u=43292735

 

 

From: cml-raw-log-hdr@... <cml-raw-log-hdr@...> On Behalf Of Geoff Boyle
Sent: Wednesday, 16 December 2020 07:49
To: cml-raw-log-hdr@...
Subject: [cml-raw-log-hdr] Extreme BMD 12K test

 

https://vimeo.com/491507391

 

This starts with a totally uncorrected image. Shot at dawn with the camera set at ISO 1600, 12K, 2:40, Q1 and handheld.

The second section has been corrected using BRAW settings only to increase exposure by 2 stops, it was noise reduced in Neat and then stabilised very quickly, it could be better, in Resolve.

 

Because of limitations of my system this had to be done in 2 passes, exposure corrected and noise reduced and rendered out as 16bitDPX then loaded back into Resolve and stabilised.

 

If I had a more powerful post system it could have been done in a single pass.

 

3 year old Dell with Intel i7, 32Gb RAM, RTX1070 with 8Gb, SSD RAID and single SSD for input and output.

 

This is just a quick and nasty example of what I’m doing at the moment, pushing the camera further and further to see what I can get away with.

 

cheers
Geoff Boyle NSC FBKS
EU based cinematographer
+31 637155076

www.gboyle.nl

www.cinematography.net

Become a CML Patron https://www.patreon.com/bePatron?u=43292735

 

 

Join cml-raw-log-hdr@cml.news to automatically receive all group messages.